美国百来福Bradford White轻型—立式商用节能电热水器-储水式-贮水式

	好施简介 \| 美国洁具 \| 美国热水器 \| 美国阀门 \| 美国泵 \| 产品知识	总部网站商务问答联系方式
	服务是我们的天职 Service Is Our Business
福建省厦门市建设大厦2509单元　　邮编：361001　　电话：592-2121956　　传真：592-2122287　　E-mail: 666@h6688.com


首页Home＞美国商用电热水器＞正文Text	【下一页Next】

美国百来福Bradford White轻型—立式商用节能电热水器
Commercial Energy Saver Electric Light Duty – Upright Models

　　达到或超过ASHRAE标准认证（美国采暖、制冷与空调工程师学会）标准90.1b 1992规定的性能标准

性能：

　　美国百来福公司通过ISO9001认证。

2英寸厚的无氟泡沫保温材料
　　包裹在内胆外层，延缓热量流失，节省能源。
在工厂安装的水接头
　　有利于延长热水器的使用寿命。安装简便。不需要另外购买特制的绝缘装置。
完全自动控制
　　安装在热水器表面的温控器反应灵敏，对水温进行全自动控制。工厂安装的感应器，用于人工设置切断电源的条件，有利于防止过热现象的发生（温控器设置的最大温度为89^oC）
直接热量转换的浸泡式加热棒
　　热能直接高效的转换到热水中。螺口型。
Vitraglas®（伟卓）内胆
　　美国百来福热水器内胆涂敷有一层独特的陶瓷一样的表面，能够有效防止热水的腐蚀作用。美国“百来福”高级二氧化硅Vitraglas®（伟卓）内胆使得热水器的内胆表面特别坚固耐用，能够经受容器内热水的高温和高压的腐蚀作用。
终端接线盒
　　所有型号均配置在工厂安装的接线盒。
可在现场转换
　　可以在现场转换为非同步单相电。
具有保护作用的金属镁阳极棒
　　这种金属镁阳极棒能够提高热水器的耐腐蚀能力，延长热水器的无故障寿命。
在工厂安装的Hydrojet®（喷水射流）全能系统
　　这种系统有利于减少冷水带入的沉淀物，有助于最大限度减少热水器内胆产生水垢，有利于增加热水供应量，减少流进的冷水对水温变化的不利影响。
降温减压安全阀
　　在工厂安装。
黄铜排水阀
钢制内胆3年有限质量保证
　　内胆由超厚钢板通过自动化控制设备滚轧、成型、焊接而成，确保在涂敷玻璃质涂层工艺过程中内胆没有任何缝隙。
配件1年有限质量保证。

本款热水器采用下列美国专利技术制造：
Re. 34,534; 4,416,222; 4,628,184; 4,669,448; 4,672,919; 4,808,356; 4,829,983; 4,861,968; 4,904,428; 5,000,893; 5,023,031; 5,052,346; 5,081,696; 5,092,519; 5,115,767; 5,199,385; 5,277,171; 5,341,770; 5,372,185; 5,485,879; 5,574,822; 5,596,952; 5,660,165; 5,682,666; 5,761,379; 5,943,984; 5,954,492; 5,988,117; 6,142,216.

轻型商用电热水器
Light Duty Commercial Electric

型号构成规则
例：LD-50S3-3C090
LD = 轻型；　50 = 容积为50加仑；　S = 热水器类型（短型）；　3 = 内胆有限质量保证期年限
3 = 相数／运行方式（三相／非同步）；　C = 电压（240V）；　090 = 最大输入功率（90 = 4.5非同步／9.0同步）

（浏览大图片Large）

标示符 Identifier	输入功率（千瓦） Input(KW)
015	1.5
020	2.0
025	2.5
030	3.0
035	3.5
040	4.0
045	4.5
050	5.0
055	5.5
060	6.0
070	7.0
080	8.0
090	9.0
100	10.0
110	11.0
120	12.0

标示符 Identifier	相数／运行 Phase/Operation
1	单相／非同步
3	三相／非同步

标示符 Identifier	电压 Voltage
A	120
B	208
C	240
D	277
E	380
F	415
G	480

同步独立运行三相电全负载下的电流安培值
（端子L3／端子L1和L2）
Three Phase Full Load Amperes Simultaneous Independent
Operation – (Terminal L3/Terminals L1 & L2)

输入功率（千瓦） Input KW	208V	240V	380V	415V	480V
6	25.0/14.4	21.7/12.5	13.7/7.9	12.5/7.2	10.8/6.3
7	NA	25.3/14.6	NA	NA	12.6/7.3
8	33.3/19.2	28.9/16.7	18.3/10.5	16.7/9.6	14.4/8.3
9	37.5/21.6	32.5/18.8	20.5/11.8	18.8/10.8	16.2/8.3
10	41.6/24.0	36.1/20.8	22.8/13.2	20.9/12.0	18.0/10.4
11	NA	39.8/22.9	25.1/14.5	23.0/13.2	19.9/11.5
12	NA	NA	27.4/15.8	25.1/14.5	21.7/12.5

型号 Model	容积 Capacity		A 热水器外径 Jacket Diameter		B 热水器高度 Height Floor to Heater Top		C 水接头高度 Height Floor to Water Conn.		D 安全阀高度 Height Floor to T&P Conn.		E 接线盒高度 Height Floor to Junction Box		标准功率千瓦 Std. KW.	每小时将水温提升56^oC的水量 GPH Recovery 56^oC. Rise 100^oF. Rise		大致装船重量 Approx. Shipping Weight
型号 Model	加仑. Gal.	公升 Liters	英寸 in.	毫米 mm.	英寸 in.	毫米 mm.	英寸 in.	毫米 mm.	英寸 in.	毫米 mm.	英寸 in.	毫米 mm.	标准功率千瓦 Std. KW.	加仑. Gal.	公升 Liters	磅 lbs.	公斤 Kg.
LD-30R3-3C090	30	114	18	406	46 1/2	1181	47 1/4	1200	46 1/2	1181	47 3/4	1213	4.5	18	68	85	39
LD-40S3-3C090	40	151	20	457	46 7/8	1191	47 7/8	1216	46 7/8	1191	48 1/8	1241	4.5	18	68	103	47
LD-50S3-3C090	50	189	22	508	46 1/2	1181	47 1/2	1207	46 1/2	1181	47 3/4	1213	4.5	18	68	130	59
LD-65R3-3C090	65	246	22	508	59 1/4	1505	60 3/4	1543	59 1/4	1505	60 1/2	1537	4.5	18	68	183	83
LD-80R3-3C090	80	303	24	559	59	1499	60 3/4	1543	59	1499	60 1/4	1530	4.5	18	68	183	83
LD-120R3-3C090	119	450	28	711	62 3/4	1594	64 3/4	1645	62 3/4	1594	64	1626	4.5	18	68	305	138

　　注：立式热水器电源配置交互锁定（非同步）240伏／3相、4500瓦的加热棒（在接线盒里，可以转换为单相运行方式和同步运行方式）。
也可提供其它功率和电压的热水器供用户选择。
　　1美制加仑 = 3.785公升

Note: The Upright Heaters will be wired inter-locking (non-simultaneous) 240 volt/3-phase operation with 4500 watt elements (can be converted to singlephase operation at terminal block as well as simultaneous operation). Other wattages and voltages available.

水温恢复表

功率瓦数 Wattage	水温上升度数华氏 Temperature Rise ^oF
功率瓦数 Wattage	40	60	80	100	120
1500	15	10	8	6	5
2000	20	13	10	8	7
2500	25	17	13	10	8
3000	30	20	15	12	10
3500	35	24	18	14	12
4000	40	27	20	16	13
4500	46	30	23	18	15
5000	51	34	25	20	17
5500	56	37	28	22	19
6000	61	40	30	24	20
7000	71	47	35	29	23
8000	81	54	40	32	30
9000	91	61	46	36	30
10000	101	68	51	40	34
11000	111	74	56	45	37
12000	122	81	61	49	40

电源特性
三相全负荷、非同步、交互锁定
运行状态下的安培值
Electric Characteristics
Three Phase Full Load Amperes
Non-Simultaneous Interlocking Operation

输入功率千瓦 Input Kw	208V	240V	380V	415V	480V
1.5	NA	3.6	NA	NA	NA
2	5.6	4.8	3.0	NA	2.4
2.5	6.9	6.0	NA	NA	3.1
3	8.3	7.2	4.6	4.2	3.6
3.5	NA	8.4	NA	NA	4.2
4	11.1	9.6	6.1	5.6	4.8
4.5	12.5	10.8	6.8	6.3	5.4
5	13.9	12.0	7.6	7.0	6.0
5.5	15.3	13.2	8.4	7.7	6.6
6	16.7	14.4	9.1	8.4	7.2

计算单相全负荷下的安培值的方法：
最大功率瓦数／电压 = 安培
例如：4500瓦／240伏热水器其安培值为：
4500/240 = 18.75安培
To calculate amperage draw for single
phase-full load use:
maximum wattage/voltage = amperage.
Example: a 4500 watt/240 volt heater will draw
4500/240 = 18.75 amps.

LDCE标准加热棒表（有效）
LDCE Standard Element Chart (Availability)

输入功率千瓦 Input Kw	120V	208V	240V	277V	380V	415V	480V
1.5	yes	yes	yes	yes	no	no	yes
2.0	yes	yes	yes	yes	no	no	yes
2.5	yes	yes	yes	yes	no	no	yes
3.0	yes	yes	yes	yes	yes§	yes	yes
3.5	no	yes	yes	yes	no	no	no
4.0	no	yes	yes	no	yes	yes	yes
4.5	no	yes	yes	yes	yes	yes	yes
5.0	no	yes	yes	yes	no	no	yes
5.5	no	yes	yes	no	yes	yes+	yes
6.0	no	yes	yes	yes+	yes+	yes	yes

+ - 不适用于30R或40T型号热水器。
§ - 不适用于6U或12U型号的热水器。
+ - does not fit 30R or 40T model.
§ - does not fit 6U or 12U models.

　　订购说明书范本
　　所要订购的热水器是美国百来福热水器，容积不小于________________加仑／公升，最小输入功率是____________KW，最小热效率是每小时产生____________加仑／公升、温度上升幅度为100^oF (56^oC)的热水。它能够与其它热水器并用，也可以单独使用。热水器内但必须是Vitraglas®（伟卓）搪瓷内胆并配置螺纹人工清洗孔。内胆应该配置突出型镁阳极棒，安装在独立的连接口上，并延伸至离内胆底部三英寸（76mm）的地方。热水器绝缘层应该采用无氟泡沫保温材料，厚度最小不得小于3英寸（76mm）。这个热水器应该配置通过ASME（美国机械工程师协会）认证的过热／超压安全法（T&P阀）。所有安装操作必须按照州或当地法规条例的要求进行。为了改善产品性能，我们不断对产品进行改进，因此产品技术规格参数若有变动或更改，恕不另行通知。

耐热镍铬铁合金加热棒表（有效）
Incoloy Element Chart (Availability)

输入功率千瓦 Input Kw	120V	208V	240V	277V	380V	415V	480V
1.5	yes	no	yes	yes	no	no	no
2.0	yes	yes	yes§+	yes§+	no	no	yes§+
2.5	no	no	yes	no	no	no	no
3.0	no	yes§	yes	yes§	no	no	yes
3.5	no	no	yes	no	no	no	no
4.0	no	yes+	yes+	yes+	no	yes	yes+
4.5	no	yes+	yes+	yes+	yes	no	yes+
5.0	no	yes+	yes+	yes+	no	no	yes+
5.5	no	yes	yes+	yes+	no	yes+	yes+
6.0	no	no	yes+	yes+	no	no	yes+

+ - 不适用于30R或40T型号热水器。
§ - 不适用于6U或12U型号的热水器。
+ - does not fit 30R or 40T model.
§ - does not fit 6U or 12U models.

These water heaters meet or exceed the performance standards established under ASHRAE Standard 90.1b 1992.

Features:

Bradford White is ISO registered to the 9001-1994 standard.

2" Non-CFC foam insulation - surrounds the tank surface, saving energy by retarding loss of heat.
Factory installed nipples - for longer water heater life. Easier installation. No special dielectric fittings to buy.
Fully automatic controls - fast acting surface-mount thermostats for automatic temperature control. Factory installed sensitive manual reset energy cutoff for safety to prevent overheating. (Maximum thermostat setting 160^oF.)
Direct heat transfer with immersed elements - apply heat directly and efficiently to the water. Screw-In style.
Vitraglas® lining - Bradford White water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. The Bradford White high silica Vitraglas?lining provides a tough interior surface for our hot water tanks.
Terminal Block - factory installed in junction box on all models.
Field Convertible - capable of being converted to single phase and/or simultaneous operation at the terminal block.
Protective magnesium anode rod - provides added protection against corrosion for long trouble-free service.
Factory installed Hydrojet® Total Performance System - cold inlet sediment reducing device. Helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up at top of tank.
T&P relief valve - factory installed.
Brass drain valve
Three year limited warranty on steel tank - heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining.
One year limited warranty on parts.

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
Re. 34,534; 4,416,222; 4,628,184; 4,669,448; 4,672,919; 4,808,356; 4,829,983; 4,861,968; 4,904,428; 5,000,893; 5,023,031; 5,052,346; 5,081,696; 5,092,519; 5,115,767; 5,199,385; 5,277,171; 5,341,770; 5,372,185; 5,485,879; 5,574,822; 5,596,952; 5,660,165; 5,682,666; 5,761,379; 5,943,984; 5,954,492; 5,988,117; 6,142,216. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING.
CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515.

Commercial Electric Energy Saver

Model Number Designation:
Example: LD-50S3-3C090
LD = Light Duty 50 = Gallon Capacity S = Tank Style (Short) 3 - Tank Warranty
3 = Phase/Operation (Three Phase/Non-Simultaneous)
C = Voltage (240V) 090 = Max. Kw Input (090 = 4.5 non-simultaneous/9.0 simultaneous)

Sample Specification
The water heater shall be a Bradford White model with a rated storage capacity of not less than ___________gallons/ liters, a minimum KW input of __________, and a minimum recovery of _____ GPH/LPH at 100^oF (56^oC) temperature rise. It shall be design certified either with or without a separate storage tank. The tank shall be lined with Vitraglas?vitreous enamel and shall have a bolted hand hole cleanout. The tank shall have extruded magnesium anode rods installed in separate head couplings and extended to within three inches (76mm) of the bottom. The heater shall be insulated with not less than 3" (51mm) of Non-CFC foam. This water heater shall be equipped with an ASME rated T&P relief valve. The entire installation shall be made in compliance with state and local codes and ordinances. Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.


首页Home＞美国商用电热水器＞正文Text	【下一页Next】