600，1500和2500磅级锻钢持续排气角阀
CLASS 600, 1500 & 2500 FORGED ANGLE,
CONTINUOUS BLOWDOWN VALVES

　　这种阀门用于持续排气应用场合，也可以用于取样；如果压降太大而产生的侵蚀和气蚀作用可能会损坏普通截止阀，这是也需要采用这种阀门起到锅炉进料泵旁路减压的作用。这种阀门配置硬面钨铬钴合金6阀瓣和阀座和一个不锈钢316文氏管扩散器。节流范围：3.18 to 28.58 mm，取决于所需容量。
　　This valve is designed for continuous blow-down but can also be used for sampling and boiler feed pump bypass relief where high pressure drop causes erosion and cavitation which can destroy conventional globe valves. It incorporates a hardfaced Stellite 6 disc and seat and a venturi diffuser from stainless steel type 316. Orifice range: ¹/₈ to 1¹/₈" (3.18 to 28.58 mm), depending on the capacity required.

其它用于锅炉厂的阀门
OTHER FORGED VALVES FOR
BOILERS PLANT SERVICE:

• 闸阀和截止阀，DN65 - DN600，螺栓或压力密封，
  ASME 600-4500磅级
  Gate and Globe
  2¹/₂ – 24” (65 – 600 mm)
  Bolted or Pressure Seal,
  ASME Classes 600 – 4500
• 闸阀和截止阀，DN8 - DN50，螺栓和焊接阀帽，
  ASME 800-1500磅级
  Gate and Globe
  ¹/₄ – 2” (8 – 50 mm)
  Bolted and Welded Bonnet,
  ASME Classes 800 – 1500
• 旋启式、活塞和倾斜阀瓣止回阀，DN15 - DN600，
  螺栓或压力密封，ASME 600 - 4500磅级
  Swing, Piston & Tilting Disc Check Valves
  ¹/₂ – 24” (15 – 600 mm)
  Bolted or Pressure Seal,
  ASME Classes 600 – 4500
• Y形无阀帽截止阀，DN8 - Dn100，ASME 1690 - 4500磅级
  Y-Pattern Bonnetless Globe Valves
  ¹/₄ – 4” (8 – 100 mm)
  ASME Classes 1690 – 4500
• Y形活塞止回阀，DN8 - DN100，ASME 600 - 4500磅级
  Y-Pattern Piston Check
  ¹/₄ – 4” (8 – 100 mm)
  ASME Classes 600 – 4500