Y形或侧面结构
Y-Pattern or Lateral Configurations
可提供配置60或90度角度的阀门的Y形结构阀门，以及配置30或60度角度的侧面结构阀门作为标准排列结构。
Y-Pattern configurations with 60 or 90 degree
angled valves, and Lateral configurations with 30 or 60 degree angled
valves are offered as standard arrangements.
定制工程结构
Custom Engineered Configurations
美国DeZurik（德朱瑞克）拥有40多年的设计和制造刀闸阀混合和转向阀门的丰富经验，可提供更加多样化的选择以满足特殊应用环境的各种定制工程要求。请联系美国DeZurik（德朱瑞克）公司了解有关定制设计结构要求的内容。
With over 40 years experience in designing and
constructing knife gate mixing and diverting valves, DeZurik has a large
variety of custom-engineered options to meet a wide range of special applications.
Contract DeZurik regarding custom-designed configurations.
净化清洗连接
Purge Connections
为了有助于在执行器工作期间能够从死角处清除淤积的物质，在阀门的阀腔和阀座区域内可以提供净化清洗流道。
To facilitate the removal of product from the
dead space at the time of actuation, purge ports can be offered in the
chest and seat area of the valves.
一个进口和四个出口的转向阀可以提供真正的Y形排列结构形式。
Diverter valves with one inlet and four outlets
are available in True-Y pattern arrangements. |
|
侧面结构，可以提供带30度或60度角度阀门作为标准配置。其他类型的排列结构可以根据用户定制。
The lateral configuration, with 30 or 60 degree
angled valves, are available as standard. Other arrangements can be custom
engineered.
直接和倒流选项
Direct & Reverse Flow Options
阀门可以安装成Y形或侧面结构，既用于直接流动应用，也可以用于倒流应用。
Valves can be mounted in Y or Lateral configurations
for either direct or reverse flow service.
执行器和附件选项
Actuator & Accessory Options
可提供手轮，锥齿轮，气动缸体和弹簧恢复执行器。另外，还可提供种类更加丰富的附件供选择。
Handwheel, bevel gear, pneumatic cylinder and
spring-return operators are available. In addition, a wide variety of
accessories and options are also available.
订购
Ordering
如果要订购刀闸阀混合和转向阀门，请注明下列信息：
To order a Knife Gate Mixing and Diverting Valve,
specify the following information:
- 所匹配的管道/管子内径和管壁壁厚
Mating pipe/tube ID and thickness
- 与标准配置不同的Y形或侧面角度
Y or Lateral angles other than STD.
- 与阀体材质不同的Y形或侧面结构的材质
Material for Y or Lateral if different than body
material
- 注明所需的特殊尺寸（美国DeZurik标准结构是尽量缩小占用空间）。
Give any special dimensions needed (DeZurik's
standard is to configure to use minimal space).
- 所需要的执行器和附件。
Actuator and accessory requirements.
|
