第一章
PART I

1.1

概论
GENERAL

产品描述
DESCRIPTION

所包括的工作：在本节范围内，建筑承包商应该负责与布置、安装、测试、定位和运转本说计划书所指的潜水泵设备和相关规定所需要的全部劳力、设备和材料。
Work Included: Under this section, the contractor shall provide all labor, equipment and material necessary to furnish, install, test and place in operation Submersible Pumping Units as shown in the plans and as specified herein.

其它工程特有的工作
Other Project Specific Work

在其它地方描述的有关工作：工程特有工作
Related Work Described Elsewhere: Project Specific

概述
GENERAL

布置和安装 ________ 潜水泵设备，包括所有本计划书和有关规定中所显示的，或系统完全运行所需要的附属设备、控制装置和附属部件。在本规格说明书表1中所规定的工作条件下，每台泵设备应该能够处理（腐蚀性）（研磨性）的污水。
Furnish and install _______ Submersible Pumping Units complete with all accessories, controls and appurtenances as shown in the plans and specified herein or as required for a complete operating system. Each Pumping Unit shall be rated for (corrosive) (abrasive) wastewater in accordance with the operating conditions defined in Table 1 of these specifications.

这种泵设备应该具有这样的性能，当泵设备的排泄口放置在排泄管连接处时，能够自动进行连接。为了便于观察和维护，这种泵应该具有这样的性能，不需要拆卸螺母、螺栓或其它紧固件，也不需要人员进入湿井内，就能够将泵轻易拆卸下来。为了进行观察和拆卸，每台泵都应该配置一条具有适当强度和长度的（不锈钢缆或不锈钢链）来将泵提升起来。
The design shall be such that the pumping units will be automatically connected to the discharge piping when lowered into place on the discharge connection. The pump shall be easily removable for inspection or service without the need for removal of nuts, bolts or other fasteners and without the need for personnel to enter the wet-well. Each pump shall be fitted with a (stainless steel cable or stainless steel chain) of adequate strength and length to permit raising the pump for inspection and removal.

质量保证
QUALITY ASSURANCE

制造商资格要求：这里所描述和规定的泵都是以位于美国伊利诺斯州的美国约曼泵公司的产品为标准。
Qualifications of Manufacturers: The pumps shown and specified are based on the products manufactured by Yeomans Pump Company, Aurora, Illinois.

质量控制
QUALITY CONTROL

这些干井潜水泵装置应该符合美国电气制造业协会NEMA，美国全国电气规程NEC，SWPA和美国水利协会Hydraulic Institute的所有相关规定和要求。如果这些规定和要求有修订或有新的版本，那么这些规定和要求生效后制造的泵应该符合新的规定和要求。对于本规格说明书中的主要部件所采用的所有材料，当业主或工程师提出需要时，应该能够提供铸造厂证书供业主或工程师查验。
The Dry Pit Submersible Pumping Units shall conform to all applicable requirements of NEMA, NEC, SWPA and Hydraulic Institute. For purposes of this specification, the revision and/or version of the referenced standards in effect on the date of bid shall apply. Foundry mill certifications shall be available upon request by the owner or engineer for all materials specified herein for major components.

这里指定的潜水泵装置应该由著名的、专注于设计、制造和配置污水泵设备至少十（10）年以上的制造商生产制造。这个泵制造商应该为所提供的泵中部件的兼容性负全部责任。电机和泵应该由同一家制造商生产制造，以保证设备的质量保证不会产生扯皮现象。那些无法自行制造潜水电机的制造商，以及那些对电机的质量保证有所保留的制造商，都是不能接受的。
The Submersible Pumping Units specified shall be the products of reputable manufacturers who have been regularly engaged in the design, manufacture and furnishing of Wastewater Pumping Equipment for at least ten (10) years. The manufacturer of the pump shall assume full responsibility for the compatibility of the supplied components with the application. The motor and pump shall be manufactured by one company providing sole source responsibility for the warranty of the unit. Manufacturers who do not manufacture the submersible motor and who limit their warranty to that of the motor manufacturer shall not be acceptable.